Menu
Cart 0

ES-3 mk3

Expert Sleepers

  • $ 32500

Pre-Order

ES-3 mk3 Improvements
  • The ES-3 is now at mk3. Functionally equivalent to the ES-3 mk2, the mk3 adds these improvements:
  • Higher spec DACs and lower noise circuitry
  • Easier access to the expansion headers
  • More robust ADAT port
  • More visible LEDs

The ES-3 mk3 is a Eurorack format module which converts eight channels of ADAT Lightpipe input to DC coupled outputs on 3.5mm jacks, for the ultimate convenience in connection of a DAW directly to analogue synthesizers.

The outputs can be used as control voltages (CVs), for example with software such as Expert Sleepers Silent Way, and can also be used as audio outputs at high, modular synth-compatible levels.

With the ES-3, a single optical cable is all that is need to bring direct CV control from your DAW right into the heart of a modular system.

96kHz compatibility

The ES-3 produces 8 outputs as normal when the ADAT interface is operated at 44.1/48kHz. In double speed mode (88.2/96kHz), the ES-3 outputs
4 channels, duplicated across pairs of outputs (ES-3 outputs 1/2 carry ADAT channel 1, outputs 3/4 carry ADAT channel 2 etc.).

However, users of Silent Way can take advantage of the Silent Way SMUX plug-in to interleave CVs on the 96kHz stream, restoring the number of usable CV outputs to 8. (See the video below.)


Technical Details
  • Eurorack Format
  • 8HP
  • Module depth: 53mm
  • Input connection: optical, ADAT Lightpipe standard
  • D/A conversion: 24 bit, 105dB SNR typical
  • Output connections: 8x 3.5mm jacks, DC-coupled
  • Maximum output voltage: approximately ᄆ10V DC
  • Indicators: LED for ADAT clock sync; 2 LEDs per channel indicate output voltage (+ve/-ve)
  • Current draw: 145mA on the +12V rail, 45mA on the -12V rail (190mA total)
  • Slot Drilled Panel hole for both Doepfer and Analogue Systems Cases.
  • -12V furthest from the top of the board.





We Also Recommend