Cart 0

USB Solo - USB MIDI to CV converter


  • $ 24900

Kenton brings you the 'USB-Solo' high specification single synth USB MIDI to CV converter.

  • Power: Power is supplied by the USB host device via the USB cable.
  • Dimensions: 130 x 97 x 40 mm.
  • MIDI: In & Out (via USB).

  • Analog Outputs: CV on 3.5mm mono jack (V/oct or Hz/V or 1.2V/oct).
  • Gate on 3.5mm mono jack (Gate or S-trig with or without pullups).
  • Aux1 on 3.5mm mono jack (CV and Aux 1 use 16bit DAC for rock steady pitches).
  • Digital Outputs: Aux2 & Aux3 on 3.5mm mono jacks (off=0 volts on=+5 volts).
  • Sync 24 on 5 pin 180 degree DIN socket.
  • USB Connector: Type B socket USB A to B cable supplied 1.8 metre.
  • A 1.8 metre USB A to B lead is supplied with the unit.

Note: All other leads are sold separately.

This product does NOT replace the Pro-Solo mkII - it is an additional product for users who want to connect to their computer using USB. If you want to connect using normal MIDI DIN sockets, then choose the 'Pro-Solo MKII'.

  • Designed to control all types of mono-synth
  • CV and Aux1 outputs use high specification 16 bit D/A converters for rock-steady pitches
  • Fine tune & scale are software controllable
  • Multiple and single trigger modes - adjustable re-trigger time
  • Portamento - fixed rate or fixed time modes
  • Programmable LFO - 9 wave shapes inc. random
  • LFO can be synchronised to MIDI clock
  • LFO sync point can be selected
  • 40 memory locations for store / load
  • MIDI monitor mode - for easy MIDI troubleshooting
  • USB powered

We Also Recommend