Cart 0

Thingamagoop 2

Bleep Labs

  • $ 16000

What's new in Thingamagoop 2?
  • Analog VCO controlled by analog or digital signal from Arduino. (A separate Arduino board is not required) ユ
  • Sample and hold, Arpeggios, noise, and bit crush effects with open source code so you can program your own sounds!
  • All the analog sounds of the original Thingamagoop.
  • Controllable LEDacle ヨ Ramp and random waveforms with rate control.
  • New modulators ヨ Square wave amplitude modulator and triangle wave pulse width modulator.
  • Tough, stomp box type body with silk screened graphics in 3 different styles.
  • Easy to access battery ヨ No more screws!
  • Much fuller and louder speaker.
  • CV in and out.
  • Arduino Programmer jack. Easily hook an Ardunio board up to the Thingamagoop 2.
  • Still assembled in Austin, Texas by Dr. Bleep and friends.
The Thingamagoop has a stereo 1/8″ jack on the side to facilitate control voltage in and out. You can make your own cable very simply or order a nice, shielded one from us. Itメs simply a stereo 1/8″ to two, mono female 1/4″ jacks. Hereメs Dr. Bleep and his band, The Hearts and the Minds, using the Thingamagoop 2 to control a Moog Prodigy. The CV input is not 1volt/Octave but you can use it to make some ridiculous sound!

The Thingamagoop 2 can operate from either a 9 volt battery (not included) or a standard 9 volt DC wall wart with a negative (-) center (not included).

We Also Recommend